any machine builders on here
just seeing if there is anyone else on here that builds machines i currently havnt started doing full builds just doing a lot of research and studying and working my way up with rebuilds and tune ups right now until i can get the rest of the equipment had a few questions for some one that would let me pick their brain a little :P or someone that knows machines really well like what Hz you like to run your liners at and with what spring combo ect. iv been messing around with a couple machines and they are all completly different one has a little over 1/8th stroke with .020 main and .018 timing running at 130Hz and one thats 1/8th stroke .014main .015timing and at 122Hz and the second one hits twice as hard... not sure on the cap sizes i havnt cut the heatshrink off to see that or ohm out the coils to see what they are wrapped as but just curious as to what others may think about the speed of them just as what iv gotton a liner should be around 150 to 160Hz ish i know everyone likes it at different ranges but whats your thoughts on it all. also first machine is running at 44duty and second is 45duty
|