05-28-2009, 02:27 PM
|
|
Senior Member
Field Marshal
|
|
Join Date: Jan 2008
Location: Jersey Shore
Posts: 1,094
|
|
Re: Cross Contamination
[QUOTE=Deran;43213]
Why in the world would someone be against bagging their machines?? Admittedly I don't bag them all the time, but I spray them with cavacide afterwards. I want to get in the habbit though. QUOTE]
i knew this would be coming up, i bag everything but my machines, why you may ask? putting a bag over your machine creates a barrier that traps heat. there is always going to be micro splatter from the chuck end of the tube trapped inside the heat filled bag and on your machine. i would rather just wipe them down when finished with madacide, cavacide or any germicidal cleaner than have to worry about bacteria growth under my coils, in them or just plain messy, bloody ink getting all over my machine. this has been debated for years and regardless which side of the fence your're on, it's not too hard to be clean and free from cross contamination.
i see a lot of hot shot guys CC at conventions and it drives me nuts. some people don't understand how to break down with one clean glove and one dirty glove. i go through 3 sets of gloves to set up and 3 more to break down, nevrmind the 12-20 pairs i throw away during the tattoo. gloves and proper barrier coverage are not expensive and the cost goes to the client anyway.
and for f@#ks sake, leave the stupid f@#kin cell phone alone while working. nothing says i care about what i'm doing to you like arguing with my girlfiend on the cell while your getting your tattoo. treat your client like they are the most important thing in the world, because they are. they are paying your bills, each and every one.
|
05-28-2009, 02:36 PM
|
|
Senior Member
Field Marshal
|
|
Join Date: Feb 2006
Posts: 1,213
|
|
Re: Cross Contamination
[QUOTE=jerseyjaywymbs;43219]
Quote:
Originally Posted by Deran
Why in the world would someone be against bagging their machines?? Admittedly I don't bag them all the time, but I spray them with cavacide afterwards. I want to get in the habbit though. QUOTE]
i knew this would be coming up, i bag everything but my machines, why you may ask? putting a bag over your machine creates a barrier that traps heat. there is always going to be micro splatter from the chuck end of the tube trapped inside the heat filled bag and on your machine. i would rather just wipe them down when finished with madacide, cavacide or any germicidal cleaner than have to worry about bacteria growth under my coils, in them or just plain messy, bloody ink getting all over my machine. this has been debated for years and regardless which side of the fence your're on, it's not too hard to be clean and free from cross contamination.
i see a lot of hot shot guys CC at conventions and it drives me nuts. some people don't understand how to break down with one clean glove and one dirty glove. i go through 3 sets of gloves to set up and 3 more to break down, nevrmind the 12-20 pairs i throw away during the tattoo. gloves and proper barrier coverage are not expensive and the cost goes to the client anyway.
and for f@#ks sake, leave the stupid f@#kin cell phone alone while working. nothing says i care about what i'm doing to you like arguing with my girlfiend on the cell while your getting your tattoo. treat your client like they are the most important thing in the world, because they are. they are paying your bills, each and every one.
|
yeah, i agree with that for sure. its just basic principles of cross contamination. it blows my mind how irrelevant people think it is. bagging i think is just an extra precaution. i hate the "machine bags" they are too tight, and trap heat. i use sandwich bags, that are thin, and loose, and just prevent things like brishing the machine against the tattoo, having it exit your sterile field, etc. the best and most basic thing you can do is spray own your machines...i just feel better with the bag. not right or wrong, just your comfort level, as long as they are sprayed for the proper kill time, they are good to go.
|
05-28-2009, 05:31 PM
|
Newbie
Recruit
|
|
Join Date: May 2009
Posts: 4
|
|
Re: Cross Contamination
Quote:
Originally Posted by travelingtom
bag your f@#king machines people, in fact put a bag on everything, it's not hard. oh and i like your cheer conor
|
you know it may not be such a good idea to bag your machine because of heat and moisture being created inside the bag kind of like the greenhouse effect...bacteria grows faster in these conditions.
|
05-28-2009, 05:38 PM
|
Newbie
Recruit
|
|
Join Date: May 2009
Posts: 4
|
|
Re: Cross Contamination
[QUOTE=jerseyjaywymbs;43219]
Quote:
Originally Posted by Deran
Why in the world would someone be against bagging their machines?? Admittedly I don't bag them all the time, but I spray them with cavacide afterwards. I want to get in the habbit though. QUOTE]
i knew this would be coming up, i bag everything but my machines, why you may ask? putting a bag over your machine creates a barrier that traps heat. there is always going to be micro splatter from the chuck end of the tube trapped inside the heat filled bag and on your machine. i would rather just wipe them down when finished with madacide, cavacide or any germicidal cleaner than have to worry about bacteria growth under my coils, in them or just plain messy, bloody ink getting all over my machine. this has been debated for years and regardless which side of the fence your're on, it's not too hard to be clean and free from cross contamination.
i see a lot of hot shot guys CC at conventions and it drives me nuts. some people don't understand how to break down with one clean glove and one dirty glove. i go through 3 sets of gloves to set up and 3 more to break down, nevrmind the 12-20 pairs i throw away during the tattoo. gloves and proper barrier coverage are not expensive and the cost goes to the client anyway.
and for f@#ks sake, leave the stupid f@#kin cell phone alone while working. nothing says i care about what i'm doing to you like arguing with my girlfiend on the cell while your getting your tattoo. treat your client like they are the most important thing in the world, because they are. they are paying your bills, each and every one.
|
yeah this guy knows what im talkin about...i really dont mind using massive amounts of gloves to tattoo with,i dont use the same glove to set up as i would to tattoo with...thats preschool sh*t.and as far as answering the phone while tattooing,a bluetooth would be a good idea.
|
05-28-2009, 08:20 PM
|
|
Senior Member
Field Marshal
|
|
Join Date: Feb 2006
Posts: 1,213
|
|
Re: Cross Contamination
Quote:
Originally Posted by DrewBabcock
you know it may not be such a good idea to bag your machine because of heat and moisture being created inside the bag kind of like the greenhouse effect...bacteria grows faster in these conditions.
|
i guess it depends on your machines... the only machines i had that would heat up enough to make the bag hot...got sold. heh bagging is NOT meant to replace cleaning afterwards, so this really isnt an issue. does the micro splatter travel up the tube, or are the outside elements that can touch the machine a larger issue? its devils advocate.
|
05-28-2009, 11:20 PM
|
|
(.)(.) giggidy giggidy
Field Marshal
|
|
Join Date: May 2008
Location: a van down by the river
Posts: 1,116
|
|
Re: Cross Contamination
Quote:
Originally Posted by DrewBabcock
you know it may not be such a good idea to bag your machine because of heat and moisture being created inside the bag kind of like the greenhouse effect...bacteria grows faster in these conditions.
|
bagging your machine does NOT make it heat up any more than not covering it, and what your talking about is micro spray that travels up the tube into the machine, and yes that is a problem if your retarded and don't clean your machines after every tattoo. the point is to NOT get micro spray all over the entire area of the place your working. which is why i cover my machines. bagging your machines is not a shortcut to cleaning, just a safety precaution. because you can infact breath that s&!t in. and some people go as far as to use face masks. but i don't because(like i already said before) i bag my machines.
|
05-29-2009, 01:19 AM
|
Senior Member
Corporal
|
|
Join Date: May 2009
Posts: 149
|
|
Re: Cross Contamination
Don't forget new gromets and rubberbands everytime!
|
05-29-2009, 12:53 PM
|
|
Senior Member
Field Marshal
|
|
Join Date: Jan 2008
Location: Jersey Shore
Posts: 1,094
|
|
Re: Cross Contamination
Quote:
Originally Posted by HowieFelterbush
Don't forget new gromets and rubberbands everytime!
|
word
|
05-29-2009, 05:17 PM
|
|
Newbie
Recruit
|
|
Join Date: May 2009
Location: asheville, nc
Posts: 9
|
|
Re: Cross Contamination
i know here..NC.. the health dept. only cares that you have all the right stuff,but there are no concern weather any one knows how to use any of it.
scary sh!t..
|
05-29-2009, 06:51 PM
|
|
Senior Member
Field Marshal
|
|
Join Date: Feb 2006
Posts: 1,213
|
|
Re: Cross Contamination
Quote:
Originally Posted by br8e
i know here..NC.. the health dept. only cares that you have all the right stuff,but there are no concern weather any one knows how to use any of it.
scary sh!t..
|
ive been in states where its like that. they dont ask to see your set up, the ask to see if you have exra paper towels. its a step in the right direction though. some states, their liscencing limits who can own and open shops and when, and if and when they can apprentice someone. i kinda like that.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 10:18 PM.
| Home | Tattoos | Art | Publications | Messageboard | Links | Studio | Tattoo Articles | Driving Directions |
| New Pictures | Tattoo & Piercing Aftercare | Link to Us | Media |
All logos and trademarks in this site are property of their respective owner.
The comments are property of their posters, all the rest © 2004-2013 by All Or Nothing Tattoo And Art Gallery.
2569 S. Cobb Dr., Smyrna, Ga. 30080 - Phone: 770.435.9966
|